GPS and Autopilot panel component list
Dec 27, 2014 22:01:31 GMT
Post by MarkH on Dec 27, 2014 22:01:31 GMT
Component list
These are the components used in the GPS and Autopilot panels. I have given the brand names and part numbers where possible and linked to the product details at supplier sites where I obtained the parts.
NOTE: the cutout dimensions I have given are the actual dimensions of the cutouts I have used on the acrylic panels, both the hand-made and factory-made variants. These may depart from what the manufacturer specifies but they are the practical dimensions I have established through experimentation.
Leo Bodnar BBI-32 Button Box Interface – with connectors
Rotary Encoder
Cutout: Diameter 10mm, Depth 2mm.
Brand: CTS
Product code: CTS 288V232R161B2 (NOTE: Leo Bodnar also supplies a short-shaft version of this encoder, which is arguably more suitable but also more expensive.)
+ knobs (black or grey) for ¼” circular shaft.
Full data sheet: www.ctscorp.com/components/datasheets/288.pdf
(Note that the Bodnar-supplied encoders have imperial specifications. Check the data sheet for specifics of how to decode the part number.)
Square push-buttons (black, red, green)
Cutout: Diameter 12mm, Depth 4mm.
Brand: White Label
Product code: R18-23B-2-H (black)
Product code: R18-23B-6-H (green)
Product code: R18-23B-3-H (red)
Round push-buttons (red, black)
Cutout: Diameter 13mm, depth 4mm.
Product code: R13-510A BLK (red, push-to-make)
Product code: R13-502MC/BLACK (black, changeover)
(NOTE: the black components are changeover switches because this supplier does not appear to stock the simple push-to-make switches in black.)
Miniature latching push switch (red)
Cutout: Diameter 7mm, Depth 2mm.
Brand: SCI
Product code: R13-512B1 RED
--------------------------------------
The quantities required for each panel are listed below.
GPS+
10 black square buttons (R18-23B-2-H)
2 green square buttons (R18-23B-6-H)
2 red square buttons (R18-23B-3-H)
1 red latching round button (R13-512B1 RED)
2 black round buttons (R13-502MC/BLACK)
3 rotary + grey knobs (CTS 288V232R161B2)
2 rotary + black knobs (CTS 288V232R161B2)
AP+
10 black square buttons (R18-23B-2-H)
1 green square buttons (R18-23B-6-H)
1 red square buttons (R18-23B-3-H)
2 black round buttons (R13-502MC/BLACK)
1 red round buttons (R13-510A BLK)
3 rotary + grey knobs (CTS 288V232R161B2)
2 rotary + black knobs (CTS 288V232R161B2)
These are the components used in the GPS and Autopilot panels. I have given the brand names and part numbers where possible and linked to the product details at supplier sites where I obtained the parts.
NOTE: the cutout dimensions I have given are the actual dimensions of the cutouts I have used on the acrylic panels, both the hand-made and factory-made variants. These may depart from what the manufacturer specifies but they are the practical dimensions I have established through experimentation.
Leo Bodnar BBI-32 Button Box Interface – with connectors
Rotary Encoder
Cutout: Diameter 10mm, Depth 2mm.
Brand: CTS
Product code: CTS 288V232R161B2 (NOTE: Leo Bodnar also supplies a short-shaft version of this encoder, which is arguably more suitable but also more expensive.)
+ knobs (black or grey) for ¼” circular shaft.
Full data sheet: www.ctscorp.com/components/datasheets/288.pdf
(Note that the Bodnar-supplied encoders have imperial specifications. Check the data sheet for specifics of how to decode the part number.)
Square push-buttons (black, red, green)
Cutout: Diameter 12mm, Depth 4mm.
Brand: White Label
Product code: R18-23B-2-H (black)
Product code: R18-23B-6-H (green)
Product code: R18-23B-3-H (red)
Round push-buttons (red, black)
Cutout: Diameter 13mm, depth 4mm.
Product code: R13-510A BLK (red, push-to-make)
Product code: R13-502MC/BLACK (black, changeover)
(NOTE: the black components are changeover switches because this supplier does not appear to stock the simple push-to-make switches in black.)
Miniature latching push switch (red)
Cutout: Diameter 7mm, Depth 2mm.
Brand: SCI
Product code: R13-512B1 RED
--------------------------------------
The quantities required for each panel are listed below.
GPS+
10 black square buttons (R18-23B-2-H)
2 green square buttons (R18-23B-6-H)
2 red square buttons (R18-23B-3-H)
1 red latching round button (R13-512B1 RED)
2 black round buttons (R13-502MC/BLACK)
3 rotary + grey knobs (CTS 288V232R161B2)
2 rotary + black knobs (CTS 288V232R161B2)
AP+
10 black square buttons (R18-23B-2-H)
1 green square buttons (R18-23B-6-H)
1 red square buttons (R18-23B-3-H)
2 black round buttons (R13-502MC/BLACK)
1 red round buttons (R13-510A BLK)
3 rotary + grey knobs (CTS 288V232R161B2)
2 rotary + black knobs (CTS 288V232R161B2)