hello I am an enthusiastic and passionate helicopter pilot I am about to finish my flight simulator project but I have encountered a problem
buy 6 second-hand tv 2 of 86 inch 4k 2 of 80 inch fullhd and 2 of 70 inch 4 k
the problem I have is that I do not take into account the resolutions and now when running the simulator the screens do not fit the problem is that I have invested a lot of time and money and I already ran out of ideas the positions in which they are is
2. 4k tv 86 inches front
2. fullhd tv 80 one on each side
2. 4k tv 70 inches one on each side
all this gives me a half moon effect with the screens placed vertically
I tried using the reference of your video, prepar3d view groups but I have not managed to do anything because I do not know how to get the dimensions of each tv I need help
Hello. If I understand correctly, you have a semi-circular array of screens in portrait orientation, but they are of different sizes and resolutions. There should be no problem in principle setting these up with a viewgroup. You just need to measure (or calculate) the correct horizontal and vertical fields of view. I measured this for my screens in one of my videos, just using some string and a protractor. Once you have these angles you can set the correct values for each display and they should match up. You may need to set some vertical offsets if the screens are not all centred on the same horizontal line, but again that should be reasonably straightforward.
I am curious, though, how you hope to drive all of those screens!