|
Post by belairflight1 on Feb 20, 2021 10:02:36 GMT
Hello. One of your video's reviewed the Cessna yoke. Can you explain how to reduce the range of motion so that I don't have to move the handle fully around to activate the controls? I am using Windows 7 64 bit with fs2004.
Sorry if I have posted in the wrong section. I am a little confused.
Regards,
Tony Gerard (newbie)
|
|
|
Post by MarkH on Feb 20, 2021 12:03:33 GMT
Hello. One of your video's reviewed the Cessna yoke. Can you explain how to reduce the range of motion so that I don't have to move the handle fully around to activate the controls? I am using Windows 7 64 bit with fs2004. Tony Gerard (newbie) Hello Tony. If I understand what you are asking, you need to go into the Windows calibration screen for the yoke. When you go through the calibration and it asks you to move the yoke in complete circles, DON'T move the roll axis all the way to the edges, just move it about half-way when you do that step. You should move the putch axis all the way in and out unless you want to fiddle with that too. Hope that helps.
|
|